What Are The Steps For A NETGEAR VPN Router Setup?

A virtual private network, sometimes known as a VPN, gives you safe access to your local network from any location where you have an Internet connection. Each Windows computer that will be used to connect to your network via a virtual private network (VPN) has to have the Open VPN software installed on it first.

A VPN connection is established with your router via a dynamic DNS account. Before you can use the VPN, you must ensure that Dynamic DNS is enabled. Visit this link for further information regarding the activation of dynamic DNS. Using www.no-ip.com, you may learn how to configure dynamic DNS on a NETGEAR router.

• Launch an Internet browser on your personal computer or smartphone from a device that is already linked to the network provided by your router.
• Enter “http://www.routerlogin.net” into the text box. A window to log in will open.
• admin and password are the user names and passwords that are used by default on the system. Both of them are sensitive to case differences.
• At this point, the Home screen for BASIC will show up.
• Now, select “Advanced” > “Advanced Setup” > “Wireless Bridge” from the drop-down menu.
• The page for the VPN Service will then load.
• Make sure the box next to Enable VPN Service is checked, and then click the Apply button.
• On that page, you should mention the particular configuration options for your VPN service.
• Click the For Windows button to begin the download of the OpenVPN configuration files.
• For instructions on how to obtain the OpenVPN client utility, please visit http://openvpn.net/index.php/download/community-downloads.html.
• In the Windows Installer area of the page, locate the OpenVPN-install-xxx.exe link and perform double-click on it.
• Simply downloading and installing the Open VPN program on your computer is as simple as clicking the OpenVPN-install-xxx.exe file.
• Select the Next button.
• After you have finished reading the License Agreement, click the button that says “I Agree.”
• Keep the ticked boxes in their selected states.
• Click the Next Button.
• Click Navigate and choose the folder that will serve as the destination. to name the folder that will be the final destination.
• After that, select the Install option.
• The window shows the current installation status as well as the completion page for the installation.
• You can complete the task by clicking the Finish button.
• After downloading the configuration files, you will need to unzip them and then place them in the folder on your device where you installed the VPN client.
• On client devices that are running 64-bit versions of Windows, the VPN client is installed in the C: Program FilesOpenVPNconfig directory by default.
• Change the name of the virtual private network interface on Windows client devices to NETGEAR-VPN: a. On your computer, go to the tab labeled “Networks.”
• To access the Ethernet settings in Windows 10, navigate to the Start menu, then to Settings, then to Network and Internet.
• Start > Control Panel > View network status and tasks are where you’ll find it if you’re using Windows 7.
• Choose Change adapter settings.
• Within the list of local area connections, look for the connection that bears the device name of the TAP-Windows adapter.
• Select the local area connection, and then give it the name NETGEAR-VPN (do not rename the device itself).
• In the event that the VPN interface name is not modified, the VPN tunnel connection will be unsuccessful.